| Customization: | Available |
|---|---|
| Type: | Dhen Type |
| Installation: | DIN Rail |
|
Still deciding? Get samples of US$ 5.8/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Surge protector belonging to (hereinafter referred to as SPD) are suitable for AC 50 / 60Hz,, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system, it protect to indirect and direct lightning effect or other transient over voltage. SPD design according with GB18802.1/IEC61643-1 standard.
| TYPE | DHEN TYPE / D-2P |
| Max. continuous operating a.c. voltage Uc | AC 275V/385V/420V |
| Norminal discharge current (8/20 p s) In | 20kA / 30kA |
| Max. discharge current (8/20 y s) (L-N) Imax | 40kA / 60kA |
| Voltage protection level Up | ≤1.8kv-2.0kV |
| Response time tA | ≤25nx |
| Operating temperature range Tu | -40ºC-80ºC |
| Operating state/fault indication | Green/Red |
| Cross-section area (Min.) | 6 mm² |
| Cross-section area(Max.) | 35mm² |
SURGE PROTECTOR DEVICE DETAILS:
SPD FEATURES :
1 INSTALLATION
a This power module surge protector can be combined according to different requirements and applied to single-phase and three-phase TT/TN/IT power supply systems to meet the protection requirements of different power systems. When installing on the 35mm rail, the Kevin is preferred. Wiring method can also be used as follows.
b The surge protector should be installed after the fuse of the power supply line. The capacity of the fuse should not exceed 315A GL/gG. If this value is exceeded, a 315A GL/gG fuse should be added to the surge protection branch.
c According to the logo of the protector, the wiring connection shall be as follows: the insulated copper wire with a cross-sectional area of not less than 10mm2 and the withstand voltage not lower than 500v AC, the length of the Boxian length of 13-15mm shall be as short as possible and not more than 0.5m. Meet the requirements of relevant standards.
2. DIMENSIONS:
SPD Surge Protector Device Package:
Standard export carton packing:
96 pcs/ 1 carton ;1 pcs/ 1 box
Carton Size 41*33*25 CM3
G.W./N.W.: 22/21 kgs
SPD Surge Protector Device Delivery Time:
3-20 days after confirming order,detail delivery date should be decided according to order quantity.
SPD Surge Protector Device Shipping:
1. Shipment port:SHANGHAI/NINGBO
2. By Air or by Sea for batch goods,Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. DHL UPS.... ect express
Yueqing Beibaixinag Xingpeng Electric Switch Factory (Shanghai Mezeen Electric Co.,Ltd) is intergrates research and development, production, sales and service ,Which was established in 2003 and has more than 20 years of professional production exprerience. Our Products include Miniature Circuit Breaker, Leakage Circuit Breaker, MCB distribution box, Switches and Sockets, Knife switch and so on .
Our products not noly have a stable market in China, but also have been exported to many cuontries of European, South American, North American, East Middle and Asia. We always sticks to the philosophy of : Pursuing Survival with Quality, Promoting Development with Technology,Achieving Customers with Services".
Because of long-term cooperation with a large number of foreign customers ,we can fully understand the needs of customers accurately. we sincerely welcome customers to visit our company for inspection and business discussion.
1
All your enquiry will be replied within 8 hours.
2
Of course! We also believe that sample order is the best way to prove the quality.And in our company we offer free sample service! Please send the enquiry to us and get the free sample!
3
Yes,Our company are available for OEM.
4
2 years warranty for SPD, our products are 100% inspection.
5
It usually takes about 3-5 working days for sample order,and 10-20 days for official order.
){kind=link}